How to Connect a Halo Driver

Updated: October 11, 2024

A halo driver is a device that is usually provided along with the halo upgrade kit. CCFL, LED and plasma halo rings require driver installation to protect the halos from voltage spikes and other electric anomalies that can potentially damage the lights. That’s why it is important to install the driver properly. Here is how the halo ring driver has to be connected.

Step 1. When the halo wires are routed, halo pins need to be fed into the driver clip.
Step 2. When attaching the pins, make sure the pins are fed into the outside slots of the clip.
Step 3. Once done, mount the driver in a safe place outside of the headlight assembly. It is recommended that you use a zip-tie or adhesive to secure the halo driver in place. Make sure that the driver does not block any headlight venting.

Halo driver installation: Pro tips

Do not rewire or bypass the halo driver, as it may lead to halo damage that is not covered by the warranty.
Never wire several halos or other LED devices to a single driver.
If the halo won’t turn on after the driver installation, switch polarity (+/-) between the driver and halo ring.
Each driver is made to work with a specific LED/CCFL device, so do not switch drivers.

ABOUT STEVEN DAVIS

certified mechanic at Halo Headlights Steven is a certified mechanic and technical writer at Halo Headlights. Steven is excited about fast cars, loud music and car mods. On yearly basis he visits SEMA, as well as other car shows. He has installed thousands of HID and LED kits and did hundreds of custom headlight retrofit projects. Now, he is ready to share his experience with Halo-Headlights.com readers. If you have questions to Steven, just ask your question using the form.

Questions & Answers

Submit your review
Name:
Location (Sity, State):
Vehicle:
Rating:	1 2 3 4 5
Review:

Check this box to confirm you are human.
Submit Cancel

Create your own review

Plasma Halo Headlight Rings

Average rating:

1 reviews

Frank Lewis

Apr 19, 2018

by Frank Lewis

Location (Sity, State): Atlanta, GA

Vehicle: Subaru Impreza

I love the way my new halo rings fit my Impreza's headlights. There's nothing difficult in the installation as long as you are not in a hurry and do everything right. Here's a friendly advice: be careful when you bake your lights!

1 Comment to “ How to Connect a Halo Driver”

Douglas Johnston says :Reply

February 25, 2021 at 5:16 pm

I installed your Item # 284606140 on my 1995 Yukon the halo has burnt out/quit working on the outside of the right headlamp. where do a get a replacement and how do I install it. The headlamps fit poorly by the way.